Видео

Would like to see how well it does gradients!? 🤔😃 Perhaps in case mode

is this because text doesnt work in Free CAD???

Great point!!! The spools. The only thing is Callum, PLA is not biodegradable unless it meets very specific conditions. It has to be constant temp, in a special type of plant, with certain micro organisms. Very few plants do this. If you leave a benchy. in the forest for 10 years it will still be there....

got major under extrusion can see through my prints and pull them apart checked all of the points you showed no joy prints blob perfect new nozzle too i did notice the stepper motor is hot is this normal

Fabulous, thank you.

hi idk if you will read this but can you please tell me what you used to slice the files for this printer

Insane😮 I assume this is the same for the F30/F80 3 series?

Hi, after drilling a hole does the water come out or does it still hold up in the quarter panel?

What happened Callum are you one to other ventures now? Just thinking of buying one of these and looked for an updated video but seen you have not been on for a year now… are you still about? Did this work well? Does anyone else now have theirs working? Cheers.

It worked! Thank you!

Who ever strugles with estep seting instal Pronterface conect to leptop and write there the code he mentioned should work , cheers

My cr10 s5 also broke a plastic piece, so... What is the name of the kit please the link does not work... Please

Thank you! I refer back to this video whenever this happens 😊

For a 3 year old video this is still relevant. This needs doing if you haven't already. Does anyone know if there is a drain the other side of the rear wheel arch in the boot, (underneath towards the rear of the car) as maybe water can slosh over if full enough?? Thanks again. 😊

I was thinking it may be easier for you to get your logo in stamp form if possible, maybe 3 different size stamps. Save things getting messy and easier for you to apply for each box you send out?

Very informative Callum, appreciated. I was considering a 3D printer to make something similar. A4 Stencils of children's characters to help with drawing and colouring. Do you think this would be possible?

I’ve done same to my f33 last week and didnt put back drain plug, I just left the hole open, you guys think is it gonna be problem in the future ? 🙏

This is great but what if you want to REMOVE lettering or a symbol from an uneven or even textured CURVED surface?

SAVIOUR!!! THANK YOU!!

Thank you so much!!!!

Interesting can it do recyclable trash like plastic forks?

Thanks for the information, we just drained about 10gal from the back. New holes made it drain much better, the sludge buildup will happen so make this a maintenance item with your oil changes and clean that plastic part

Link for direct drive not working

Thanks 🙏🏼 you help me a lot.. I was fighting with this all day long … until I search, and found you. 😊

Inkscape is great software that can create that vector file for you

very helpful, thank you

Do you have a video where you swap the extruder?

I wish you had zoomed in and showed the work before, during, and after.

I may understand the explanation (poor storage conditions) if it just did not happen to me with a filament I just bought and unpacked today. I don’t see the responsibility of the operator in that case and more importantly how to handle it ?

Just had this problem, print failed 3 times, and I was luckily able to fix it every time, this just solved my problem, thank you!

YOU ARE A LIFE SAVER BC I THOUGHT I WAS GOING TO HAVE A HEART ATTACK AND HEAD EXPLOSION IF I HAD TO RE-EDIT THE ENTIRE VIDEO OMG THANK YOU !!!!!

I LOVE YOU, MAN!!!

Great video! Thanks for the info

BMW will not own up. It should be a safety recall.hey call it a design flaw. HA! BMW service tech says they have to drill 2 holes underneath, silicone it and add a motor at a cost of $2400. Wrote NHTSA national Haighway Traffic Safety (USA). Anyone can look online and add your complaint. Maybe in numbers, BMW will respond.

this saved my day thank you so much!!!

Great video, thank you for posting!!

Hi great video, easy to fix, the only problem i found was when everything was back together, went to start vehicle and battery was flat. Is there anything that could have caused this.

I use a heatbreak and a razor blade to get a uniform and flat ptef tube Just stick it in and cut the protruding end flat

This didn't really work, it just stripped all the detail off my model. I found using the Tri count setting works better, it gives you more control over the geometry, especially if you turn on wireframe mode to see how your mesh is changing.

There is also another way too, great if you only have a couple of files. Simply go to you camera roll, hold finger on the video in question, then when the menu comes up, click duplicate. Then delete original file and import the duplicate. Problem gone.

Wassup

Yikes! Just bought a F33 440i... I'll be checking this as soon as it's on the driveway. Absolutely mad how much water came out of that! Is there an argument to leave those drain bungs out? They look like they could further the obstruction of water and debris

This could be a good reason for a recall… it’s a design flaw…

This is crazy and exactly what is happening with the 2020 440i convertible we just purchased. I heard water slashing around a few days ago and have found puddles on our garage floor. Thankful we're under warranty so no fees.

Anyone knows the part number for the drain plugs ??? Cant find it 😮

How about when print stops, tug the line, yes it’s stuck, go to check the spool, no tangle! These are the situations driving me crazy. Only happens with filament like matte that has a lot of surface friction…. likely a tension knot that pops out as soon as you touch the roll.

Hi, I want to make thicker a scale car, how can I select all or make it thicker full and not in parts?

it worked, THANK YOU!

Callum, you are my hero! Thank you so much for this great workaround! I was considering starting my project from scratch and now it took just a few minutes! Thanks again!

lol my SVG just isnt valid for some reason. it wont import at all